Semi Automatic Filter Press Wastewater Treatment Process Chamber Filter 0.6Mpa

The working principle of the box filter press is that the filter plates are arranged to form a filter chamber (the two sides of the filter plate are concave, and each two filter plates are combined into a box filter chamber).

There are pits and bosses on the surface of the filter plate to support the filter cloth. There are through holes in the center and corners of the filter plate, which form a complete channel after assembly, which can lead in suspension, washing water and lead out filtrate. There are handles on both sides of the filter plate, which are supported on the beam, and the filter plate is pressed by the pressing device. The filter cloth between the filter plates plays a sealing role.

Under the pressure of the conveying pump, the material liquid to be filtered is sent to each filter chamber, and the solid and liquid are separated through the filter medium (select the appropriate filter cloth according to different industries). Filter residue is formed on the filter cloth until the filter chamber is filled to form a filter cake. The filtrate passes through the filter cloth and flows along the filter plate groove to the lower liquid outlet channel for centralized discharge. After filtration, wash the filter residue with cleaning water. After washing, sometimes compressed air is introduced to remove the remaining washing liquid. After filtration, open the filter press to remove the filter cake (the filter cake is stored between two adjacent filter plates), clean the filter cloth, re press the filter plate and start the next working cycle.

1. Inverter motor pull plate;
2. Automatic control system: The control adopts three major brands, Omron, Siemens and Schneider products to realize automatic control of the whole process;
3. The hydraulic system runs smoothly and reliably: the hydraulic components are made of high-quality products; the integrated block is processed by the machining center; the fuel tank is produced by the manufacturing process;
4. The main beam adopts H-shaped box structure, which has good structure and anti-side bending, which completely solves the problem of bending of the main beam. Diaphragm pressing, which is as large as 25kg, reduces the moisture content of the filter cake after pressing to less than 20%; the thickness of the filter cake is 45mm , increasing the volume of the filter chamber and the processing capacity of a single unit.

It is widely used in the production process of various industrial industries such as chemical, petroleum, pharmaceutical, sugar, metallurgy, food, ceramics, starch, etc. and the purification of various industrial wastewater and domestic sewage.