10 micron 1 micron automatic strainer self cleaning filters for seawater treatment

automatical Stainless Steel Self-Cleaning Filter For Well Water Treatment

Self-cleaning filter is a kind of filter that directly intercepts impurities in water, removes suspended solids and particulate matter in water body, reduces turbidity, purifies water quality, reduces system fouling, algae, rust, etc., to purify water quality and protect other equipment in the system from normal. The working precision equipment, the water enters the self-cleaning filter body from the water inlet, due to the intelligent (PLC, PAC) design, the system can automatically identify the degree of impurity deposition, and automatically discharge the sewage to the sewage valve signal.

The principle that backwashing can be carried out automatically: As mentioned earlier, backwashing is realized by the opening of the hydraulic valve and the action of the hydraulic cylinder piston, and these are controlled by the backwashing controller. The backwash controller can accurately control the hydraulic valve and hydraulic cylinder according to the pressure difference from the inlet and outlet of the filter, and the power of the controller comes from the pressure of the pipeline itself.

Features of self-cleaning filter: Uninterrupted water supply during backwashing, and the entire backwashing is realized by cleaning every point of the suction nozzle. During backwashing, only a small local pressure changes between the suction nozzle and the fine filter, and the action of the collector and the hydraulic cylinder does not affect the normal water supply. At the same time, the amount of water consumed during backwashing is very small, and the flow rate is 300m3/h. Take the filter as an example: the backwash flow is 35-40m3/h, the backwash time is 7-15 seconds, and the backwash water volume is 80-160L

Specification