Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Home ProductsSludge Dewatering Machine

Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water

I'm Online Chat Now

Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water

Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water
Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water

Large Image :  Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water

Product Details:

Place of Origin: Made in China
Brand Name: Xinming
Certification: ISO9001,CE
Model Number: XMDL 354

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: negotiable
Packaging Details: Wooden case for new sludge dewatering machine screw press.
Delivery Time: Within 25-35 working days
Payment Terms: T/T, Western Union,D/A,
Supply Ability: 10000 Set/Sets per Year filter press
Detailed Product Description
Name: Replacing Decanter Stacked Screw Press Sludge Dewatering Machine For Waste Water Number: XMDL 354
Motor: 1.1KW Operate: Automatic,No People
PLC: Schneider, Omron After-sales Service: Commissioning And Training
Application: Meat Proccessing Plant, Sewage Treatment Control: Automatic Control Box
Warranty: 12 Months
High Light:

wastewater treatment machine

,

sludge dewatering equipment

 

Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water

 

 

 

Product Description

Low speed operation, no noise, low energy consumption, only 1/8 of the belt type machine, the 1/20 of the centrifuge.
The screw type sludge dewatering machine depends on the volume pressure dehydration, dispensing with drums and other large-sized devices so as to realize a low operation speed, which is only 2-4 revolutions per minute. Therefore, the machine is able to realize low energy consumption, low water consumption and low noise. The average energy consumption is only 1/8 of the belt type machine, the 1/20 of the centrifuge, with the unit energy consumption is only 0.01-0.1 kwh/kg-DS, being able to reduce the system operation cost of sewage treatment.

 

Model Reference

Specifications of Replacing decanter Stacked Screw Press Sludge Dewatering Machine for waste water
Main Parameters
Capacity
DS-kg/hr
240-480 DS-kg/hr
Size
mm
L4300*W2350*H1800
Power
KW
5.9
Motor
Gearbox
Brand
SEW, BAUER,
SUMITOMO, NISSEI
Protection
Certificates & IP
UL,CE, Water
proof(IP65) CCC
Screw Shaft
Treatment
SUS316L, Tungsten
carbide coating
Control Cabinet
Electrical Components
Brand
Schneider, Omron,
Siemens
Solenoid Valve
Brand
US,ASCO
Spray System
Brand
Japan Origin, H.IKEUCHI

 

Dewater Principle

Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water 0

 

The initial section of dewatering drum is the Thickening Zone, where the solid-liquid separating process takes place and where the filtrate will also be discharged. The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the End Plate further increases the pressure, so as to discharge dry sludge cake.

 

Replacing Decanter Stacked Sludge Dewatering Screw Press For Waste Water 1

 

Features

1. Automatic continuous operation

2. Easy operation and maintenance

3. Low power and water consumption

4. Low operation cost and  No filter cloth, no clogging

5. No need for sludge thickener

6. Compact design with flocculation and dewatering and No vibration 

 

Application 

The KOH-treated adsorbent had a smaller surface area (186 m2 g−1) than the ZnCl2-treated adsorbent (192 m2 g−1). However, the KOH-treated adsorbent provided more efficient removal of Cu(II). The performance of the KOH-treated adsorbent may be due to the presence of basic groups on the surface.

The Liu isotherm model provided the best description of the equilibrium data:The maximum adsorption capacities at 298 K for KOH-treated, ZnCl2-treated, and untreated sewage sludge were 31.85, 19.79, and 3.513 mg g−1, respectively. The highest desorption was obtained.

 

FAQ
Q: Are you trading company or manufacture?

A: We are manufacture. We have more than 20 years' professional experience as a waste water treatment equipment manufacturer and engineering service enterprise.

 

Q: Where is your factory located?

A:Chengdu City,Sichuan province .

 

Q: How about the production capacity of your company?

A: Our factory covers area over 20,000 M3 and produces machines 1000 sets per year.

 

Q: Do you offer after-sales service?

A: Yes. Engineers available.

 

Q:How to choose the right model?

A: Advise us the sludge source,treating capacity,solid content rate,then we could choose the suitable model for you.please put forward if you have special requirements.

 

Q: How long is your warranty?

A: One year after the arrival of the goods. During this period, as long as it is not a man-made damage,we send the damaged parts for free

 

Q: What about your delivery Time?

A: Normally within 30days against down payment.

 

Q: What about the package of your export product?

A: We use standard wooden case with foam inside.

 

Q: What kind of payment do you accept?

A: T/T, PAYPAL, Cash, D/P, WESTERN UNIION, MONEYGRAM.

 

Q: What kind of transportation do you offer?

A: Customers decide freight mode, Air, Land or Sea.

 

Contact Details
Chengdu Xinming Filter Equipment Co., Ltd.

Contact Person: Frank Tao

Send your inquiry directly to us (0 / 3000)