Payment & Shipping Terms:
|Pressure Model:||Hydraulic System||Description:||Wastewater Purification Recessed Plate Filter Press|
|Application:||Environmental Protection Industry||After-sales Service:||Online Support|
filtration filter press,
plate frame filter press
Wastewater Purification Recessed Plate and Frame Industrial Filter Press
The preparation before operation:Check the number of filter plates and the sequence in the machine, and move all the filter plates to the end of the thrust plate, check the condition of the filter cloth, the filter cloth must not be folded and broken. First check whether the upper limit pointer of the electric contact pressure gauge on the cylinder is adjusted to the range of 20Mpa, then shut the power switch, and the power indicator light is on.
|Filter Chamber Volume(L)||749|
|Foundation Size L/B/D/H(mm)||3890/600/1270/835/480|
♥Press the tight button switch to press the filter plate, the piston pushes the filter plate and presses all the filter plates. When the pressure gauge of the electric contact pressure gauge rises to the upper limit of pressure, the motor will stop automatically, and the working pressure value will maintain between the upper and lower limits.
♥Start feed pump to begin feed filtration. Ensure that the inlet valve is closed and the return valve is opened before feeding, and open the liquid outlet valve and close the air pressure inlet valve. Open the bottom valve of the autoclave and the inlet valve of the pressure filter pump. Start the pressure filtration pump, and then slowly open the feed valve. The filtrate in the earlier stage is muddy and gradually become clear. After the filter cake is formed between the plate and frame, close feed pump when the the filtrate is reduced and the feed pump pressure rises more steadily. The feed can be stopped when observing that there is no liquid outflow or less outflow in the liquid pipe. Press and close the feed pump. The pressure is about 0.6Mpa when the pressure filter is full of feed.
• In the process of compressing and pressure maitaining, no one is allowed to stand near the oil cylinder and hydraulic station.
• The squeezing is forbiddened when the filter chamber is not filled with raw materials or before filter.
• After the press is finished, it is forbiddened to loose the filter press before the water in the diaphragm cavity is completely drained (the pressure indicator doesn't return to zero),
• When the drawing plate is unloaded, the sealing surface of the filter plate must be cleaned up. The middle feed hole of the filter plate must be cleaned when there is material.
• Close the inlet valve, and fully open the return water valve before feeding.
• The temperature of pressing water must not be 10℃ higher or lower than material temperature. Prohibit the cavity of the tympanic membrane.
• The pressure should be controlled no higher than 1.0Mpa. when the press is finished, the press pump and the inlet valve should be closed, and open the press general pipe backwater switch. Discharge all the pressed water in the diaphragm plate and the pressure gauge pointer back to zero on the press assembly, then unload the discharge of the filter press.
food (glucose, protein, stevia), chemical industry (phosphor powder, potassium chlorate, potassium sulfate, etc.), pharmaceutical industry (antibiotics, alcohol, growth derived yarn, organophosphorus, saccharase), biochemical sewage treatment and other industries/
Q1: What is the Warranty for the machines?
A1: 1 year for free.
Q2: When can I get the price?
A2: Within 24 hours, if urgent, please directly call us.
Q3: Whether the machine price can be more discount?
A3: In general, our MOQ is 1set with very reasonable price, but if large order, we also can apply to our Manager to appropriately give you a little discount.
Q4: How to ask quotation?
A4: Please directly tell us which item you are interested in, or note us what tpye of materials, and how many tons of materials you want to treat per day or per hour, then we will send you quotation as soon as we can.
Q5: How long will it take to receive my products?
A5: As soon as possible, it will take one 15-35 days for us to produce.
Contact Person: Frank Tao